Gently rub the electrodes with a soft (tooth)brush while rinsing it with lukewarm tap water.
An EEG headcap should be cleaned after every measurement session. This can be done by gently rubbing the in- and outside of the cap with a soft (tooth)brush while rinsing it with lukewarm tap water. In case you want to use a detergent, we suggest you to only use Ivory detergent. Be careful to prevent the connector(s) from getting wet. Place the connector cable over your shoulder while cleaning the cap to prevent it getting wet. After cleaning the cap, hang the headcap to dry. Direct sunlight should be avoided. Again, the connector should be higher than the cap to prevent water from leaking into the connector.
Click here to watch an instructional video how to clean your gel headcap.
Do you have further questions on this topic?