How can I measure HD-EMG with SAGA?

To measure HD-EMG with your SAGA system, you will need to connect the HD-EMG adapter cable to the Textile grid.

Depending on the variant, SAGA features either 32- or 64 channels to measure HD-EMG with, see Figure 1 and Figure 2 below, respectively. 

^{Figure 1: SAGA32+ & Textile grid 4-8-L                                              Figure 2: SAGA64+ & Textile grid 8-8-L}

The Textile grid can be easily connected to the unipolar input of SAGA via the HD-EMG adapter cable. For more information about the Textile grids, its sizes e.g., and the adapter cable, please visit this webpage. 

It is also possible to combine two SAGAs to measure 128 HD-EMG. Learn more about the SAGA Synchronization Module on this page.

Replace your Flex-PCB HD-EMG Grid

It is possible to have your old 64ch HD-EMG grid cable converted so it compatible with the Textile grids. Feel free to reach out to our Sales department via sales@tmsi.com for more information. 

Watch Video 1 below for a product demonstration.

_{Video 1: Recording HD-EMG signals 64-Ch Textile HD-EMG Grids}